Manufacturer name | Maker unspecified parts |
---|---|
Product Condition | 評価: 5 ? |
Shipping | Shipping instructions |
Payment Method | PayPal |
In type II
Outer cut angle
It is a setting that raises the inside cut angle by 2 to 3 degrees from the current state
The difference between left and right is set to 6 to 7 degrees, the same as type II
In the stopped state, it is 4 degrees to 6 degrees considering the load at the time of drift
10mm short makes it even quicker than Type I
Wheel angle is higher than the current angle
Tension rod
You need to take measures such as fenders
Reference wheel size
Type②8J + 12 ~ + 17
8.5J + 6 ~ + 11
9J + 0 ~ -5
9.5J-4 ~ -11
Recommended tire size 235
Cut the genuine lower ball joint as shown in the image
The ball joint is a consumable part of the tourer system, so a new one is recommended.
Don't forget to cut the rust
We have cut new genuine lower ball joints (10
000 yen (excluding tax))
One of the advantages is that the lower ball joint of consumables can be replaced because it is a sandwich type
Roll center 17mm can be corrected by pinching it, and it can run with confidence by using strong material
And
Because we sell only plates
Specification changes can be made cheaper
Only plate sold
Twenty
000 yen (excluding tax)
Type ②③
Same price
For details, see the URL below
URL: http://www.ito-auto.co.jp/parts.html
Price USD
required
required
required
Web Site | http://www.ito-auto.co.jp/ |
---|---|
Hours | WeekAM10:00~PM8:00 |
Regular Holiday | 金曜日(年末年始、G/W、お盆、イベント開催日) |